批次触摸彩屏无纸记录仪（隔离型）PLR3200

本产品为工业无纸记录仪，7寸触摸彩色液晶屏，最多32通道隔离型万能信号输入，可接入电流、电压、热电偶、热电阻和频率（定制）等工业标准信号，可同时配置报警继电器输出、电流变送输出等功能。实时采集通道信号，通过手动启停或者开关量功能来控制数据记录的开启和关闭，生成一次作业过程的数据文件，最快1秒记录间隔，通过USB设备快速转存历史数据，支持RS485、以太网通讯接口。

Functions

1. 万能信号输入（隔离型）

The recorder is designed with a maximum of 32 channels of universal signal input, which supports mV, V, mA, thermal resistance and thermocouple signals. The channel signal type is set by the input configuration, and the recorder automatically switches the corresponding acquisition circuit according to the signal type set by the configuration, and the signal acquisition period is 1 second

The channel can independently configure and set the unit, range, decimal point, adjustment, filtering, disconnection processing, small signal removal and other parameters.

针对输出mV信号的真空计，特别设计专用真空度mV信号测量电路。

2. 数据记录与报警、掉电及日志记录

记录仪根据系统组态设定记录间隔实时记录通道采样数据，记录间隔可选：1秒、2秒、5秒、10秒、15秒、30秒、1分、2分、5分、10分、30分、1小时。记录仪内部存储器64MB，支持存储最多16000个文件（每个文件最小4KB），32通道1秒记录间隔可连续存储10天，如减少通道数目，可生成的文件数量相应增加。记录模式为分文件动态循环覆盖存储，每次记录开始与停止，都会生成一个单独的数据文件，当内存不够时，最新的文件会覆盖最老的文件。记录仪同时记录运行时产生的通道报警、仪表掉电、操作日志信息，各256条记录，记录模式为循环覆盖存储。

3. 数据、曲线及记录显示

记录仪采用7寸高清触摸彩色液晶屏，分辨率为800*480像素。记录仪设计有文件列表，根据起始和结束时间对文件进行命名，可查看历史曲线、报警列表、掉电记录、操作日志等历史数据。记录仪配备中英双语系统，可自主切换使用。

4. 报警继电器输出

The recorder is designed with at most 16 alarm relay outputs, and the relay type is normally open. By setting the alarm configuration, you can arbitrarily specify the connection between relay contacts and channels, and you can set four alarm types: high alarm, low alarm, high alarm and low alarm, and you can set alarm back difference and relay delay parameters.

5. 24VDC传感器配电

The recorder is equipped with 2-loop 24VDC power outputs, which are used to power the sensor, and can directly drive the two-wire sensor. The current loop is connected in series with the input channel of the recorder.

6. 记录启停控制

正常可以通过触摸屏上的操作，选择开启和停止记录仪的记录功能，停止记录后会生成一个以开始和结束时间命名的对应数据文件。另外可选配记录启停控制功能，不需要操作记录仪也可以通过开关量功能控制记录的开始和停止，开关量两端连接时启动记录，开关量两端断开时停止记录，可配合按钮开关等部件对记录仪更方便的进行控制。

7. RS485通讯接口

The recorder is equipped with one RS485 communication interface, adopts standard Modbus RTU communication protocol, supports real-time data of channels, alarm status of channels and other data.

8. 以太网通讯接口

Ethernet communication interface can be selected for recording, and standard Modbus TCP/IP protocol is adopted to realize external data communication and transmission, and support real-time channel data, channel alarm status and other data.

9. RS485数据采集

The recorder can be equipped with RS485 data acquisition interface, and the instrument data of other lower computers can be read as channel values through standard Modbus RTU protocol.

10. 虚拟运算功能

The recorder supports users to independently configure mathematical operation formulas and realize advanced data calculation between channels.

11. 4-20mA变送输出

The recorder can be equipped with up to 8 channels of 4-20mA transmission and output functions, and the transmission relationship between output channels and input channels can be configured through output configuration settings.

12. 微型打印机接口

Optional micro printer port, automatic real-time printing of data and curves, and manual printing of historical data and curves.

13. USB数据备份

记录仪配备USB2.0接口，通过USB接口手动导出历史数据至优盘、自动定时备份历史数据。

14. 组态导入及固件更新

Support for importing and exporting configuration parameters and update instrument firmware through USB interface.

15. 流量累积（无温压补偿）

The recorder supports the channel flow accumulation, and does not have the temperature and pressure compensation function.

16. 真空度算法

记录仪支持通道真空度算法，配合真空计输出信号，以真空度形式计算、存储、显示数据。改进型真空度算法，支持现场国内外真空计信号和公式。可支持10V，20mA，10mV等信号，可设置小数型指数，例如10^-4.7~10^5，支持反量程真空度算法。

17. 上位机数据管理软件

The recorder provides the data management software, supports the data export of superior disk, and supports the real-time monitoring data of single machine. Support the curve and the data display mode, you can export the EXCEL report.

Specification

型号类型

资料下载